Skip to content

BBQTour guides

New gas BBQ: cold assembly and first-use handover

BBQTour editorial team · Updated 20 November 2026

Start a new barbecue’s first-use check while it is cold, with the gas disconnected as instructed. The aim is to establish that the delivered model, documentation and parts agree. This guide does not replace the assembly manual or provide steps for modifying gas components.

Inventory before assembling

Compare the model on the box, accessible appliance label and manual. Lay out the parts against the manual’s parts list and photograph missing or damaged items. Check separate packages before discarding packing. Do not use a photograph from another seller as the definitive box-content list.

Checkpoint Acceptance question
Identity Does the manual name this exact model and regional version?
Supports Are the prescribed feet, locks and fixings present?
Cooking parts Are grates and grease components correct and undamaged?
Fuel chain Are the supplied fuel, pressure and connector requirements clear?
Handling Can you follow the stated lifting and assembly requirements?

Check the cold operating configuration

Assemble exactly in the documented order with the specified tools and fixings. Check the leg or cart locks, grate seating, grease tray placement and access to controls. Route the hose only as specified, clear of moving parts and hot surfaces. A leftover fixing or a frame that does not lock is a reason to stop and ask the maker or seller.

Separate a rehearsal from lighting

Walk around the cold setup with the lid and shelves in their operating positions. Confirm the safe outdoor location, fuel connection documentation and the manual’s pre-use checks. Perform lighting, leak-checking and any initial preparation only under those exact instructions. Do not use generic “burn-off for 20 minutes” advice for a unit whose instructions have not been checked.

If the delivered unit is not ready

Keep the order reference, model information and photographs and contact the seller privately. Do not light a damaged appliance to obtain a video, substitute gas parts or discard needed packaging before the return/support process is clear. Tower’s listing gives useful model facts, but the actual supplied unit still needs its own complete handover. Missing information should remain a support question rather than being guessed from a comparable barbecue.

Continue with the decision

Sources and limits

Tower model and component description; Pre-use component checks. Sources checked 20 November 2026. This is a buying or planning guide, not a product test, repair instruction or approval of a particular installation.