Skip to content

BBQTour guides

Cleaning a gas BBQ grease tray and grates

BBQTour editorial team · Updated 19 November 2026

Do the cold check before your next cook. Follow the cleaning and gas shutdown instructions for the exact appliance. If the barbecue is hot, flames are out of control or you smell gas, this cleaning checklist does not apply. Move people away from danger and follow the fire service's guidance.

Cold cleaning in the right order

  1. Let the barbecue cool fully. Use a level outdoor area. Turn the appliance and supply off as the manual directs before accessing the grate or tray.
  2. Lift the grate only as shown in the manual. Use a method or tool the maker approves for that material. In particular, do not treat porcelain enamel as bare steel. Avoid oven cleaner or a metal scraper unless the maker specifically allows it.
  3. Remove the cold grease collector. Empty it without tipping residue into the burner area. Clean it as the manual directs. Check for damage or holes and replace a damaged tray with the specified part.
  4. Dry and reinstall. Make sure the tray sits squarely and the grease drain is unobstructed. Before lighting again, check that no cleaning tool, loose scrap or cloth remains inside. Do not line the tray or block openings unless the maker explicitly permits it.

Decide what needs attention

An oily grate and a removable tray with collected grease are ordinary cleaning jobs. Grease below a missing tray calls for locating or replacing that tray before the next cook; repeated flare-ups with the tray installed require a check against the manual, including the permitted arrangement of food and grease parts. A damaged fitting, persistent uneven flames or gas smell is a stop condition. Do not take a gas valve or connection apart to clean it.

If a removable part is missing from a BBQTour order or the appliance still seems unsafe, use the model and support checklist to identify the exact appliance and report the fault without recreating it.