Skip to content

BBQTour guides

Two-zone cooking on a two-burner gas BBQ

BBQTour editorial team · Updated 19 November 2026

Two-zone cooking divides a grate by what sits underneath the food. In the direct area the source of heat is under the food; in the indirect area it is to the side. With a hinged lid and independently controlled burners, some cookers allow the second burner to be off while food finishes above it. Read the manual for the exact model first. A cooler zone is still hot, and a shared burner or very short grate may leave no usable indirect zone.

Sketch your own grate

Position Job during a first practice cook Read the result
Above the active burner Put one dry piece of pepper here after the instructed preheat Browning comes faster here; move food before it burns.
Above the inactive side, where the manual permits Compare a similar piece there; keep the lid in the position specified It should take longer to colour; residual heat may still be substantial.
A clear strip between the two Leave turning space for the tongs If the whole grate has to be filled, cook in a second batch.

Orient the drawing to the actual burner positions under your grate, not the direction the knobs face. Do not create an indirect zone by blocking burners or covering the grate with foil. Only use the appliance outdoors, and follow its lighting and lid instructions each time. Essex County Fire and Rescue Service gives gas barbecue safety checks.

Use the result on a real menu

Finish a thick piece in the gentler zone where the manual allows it. Check doneness independently; lid temperature and surface browning do not tell you what happened at the food's centre. When cooking chicken, keep raw juices and utensils away from ready-to-eat food and test each piece using the Food Standards Agency's time and temperature guidance.

Compare the proposed zones with the buying guide's cook-space test if you don't yet own the barbecue. Burner count cannot tell you how much room your chosen food leaves for a cooler area.